m

Our Mission Statement

This is Photoshop's version of Loremer Ipsn gravida nibh vel velit auctoregorie sam alquet.Aenean sollicitudin, lorem quis bibendum auci elit consequat ipsutis sem nibh id elit.

Contact Us

  • 1-779-333-67992
  • info@industrybusiness.com
  • 3042 Rotterdam, Netherlands; Van Noortwijcksingel
Working ours: 08:00 – 17:00
Closed on weekends
We are located in Kaunas
Muitinės g. 2A, Domeikavos k., Kauno raj.
Top

Stationary pump

Storth manufactures a growing range of PTO and Electric motor driven static pumps suitable for mixing and pumping out of reception tanks.

Static pumps are available with or without an under-surface agitator. The under-surface agitator is ideal for mixing slurry in a reception pit before pumping into a slurry store as the agitator can be both vertically adjusted and turned horizontally through a wide arc.

PTO Driven pumps are available with 125 mm and 152 mm tubes. The discharge pipes are fitted with a male Bauer quick release coupling as standard.

All pumps are fitted with a bearing cartridge mounted above the base frame which is easily accessible for re-greasing and maintenance. A slurry lubricated bottom bearing is at

2-point linkage pump Superjet

Our range of 2-point linkage PTO driven slurry pumps enables the user to mix pits at different depths thanks to a variable depth double acting ram. This machine is transportable on the tractor link arms with the PTO disconnected (Note: With our 3-Point Linkage Pumps there is no need to disconnect the PTO). Once in position the PTO can be connected and the machine will be ready for use.

  • Fully galvanized
  • 4 Blade impeller
  • 540 RPM robust gearbox
  • Ideal machine for mixing different depth pits
  • 300° Agitator rotation
  • 80 – 100 HP Required minimum
  • PTO included

3-point linkage pump

These pumps have been developed for use by the larger farmer and contractor. The design of this range of pumps allows the user to move the pump from pit to pit without disconnecting the PTO. The machine can be depth adjusted to allow easy access to holes and to position the mixing nozzle at the correct point whilst mixing.

The design of the pump provides unrivaled pumping capacities. The function can be easily changed from mixing to pumping by a handle at the top of the pump which moves the diverting flap in the main body of the pump.

  • Fully galvanized
  • 4 Blade impeller
  • 540 RPM heavy duty gearbox
  • No need to disconnect PTO when moving to different pits
  • 300° Agitator rotation
  • 80 – 100 HP Required minimum
  • PTO included
  • Hydraulic kit option allows full control of hydraulics from the tractor seat

Electric pumps

The range of electric pumps has been developed with a number of motor sizes from 5 kw up to 22 kw to suit different applications. These operate on a 3 phase electric supply. They can be linked to float switches to allow them to start and stop automatically when the slurry reaches the appropriate levels.

The bottom bearing is a slurry lubricated rubber fluted bearing rather than the commonly used mechanical seal arrangements; this prolongs the life of the bearing and reduces maintenance of the machine. All Storth electric pumps have a top frame which is easily attached to wall sides and can also be adapted to have a safety walkway and rail attached.

  • Fully galvanized
  • 4 Blade impeller
  • 3 Phase motor
  • Motors ranging from 11kw – 22kw
  • 300° Agitator rotation
  • Static models
  • Automatic float switches available

Submersible pumps

The best solution for pumping manure from deep pits. Economical Pumping Solution. Direct powering of fan blades from the motor shaft, therefore minimum mechanical losses and high pumping efficiency. Reduced risk of problems due to long fibers in the pit due to the efficient cutter knives at the pump inlet.

  • Steel molded body with stainless steel bolts
  • Cutter knives for longer fibers
  • Hoist & Winch option
  • Alloy molded fan blades
Žemės ūkio technikos iį įrengimų dalys